No-Drill Mounting Guide
Step 1 - Clean the wall surface
Wipe the area with a dry cloth to remove any dust or dirt.
STEP 2 - Prepare the mounting plate
Peel off the protective backing from the side with the red label.
Step 3 - Stick the strips to the mounting plate
Align them evenly and make sure the ends of the strips extend beyond the edges of the plate for easy removal later.
step 4 - Attach the mounting plate to the back of the frame
Authentic materials, no compromises
step 5 - Prepare the mounting plate
Peel off the protective film from the adhesive strips.
step 6 - Place and press
Position the frame exactly where you want it to hang, then firmly press the center of the artwork for 5 seconds to stick it to the wall.
step 7 - Detach the frame
Carefully pull the frame off the mounting plate. Leave the plate on the wall.
step 8 - Lock it to the wall
Press and hold the mounting plate for 10 seconds — this step makes the bond super strong.
step 10 - Hang your poster
Slide the frame onto the mounting plate from the top so it locks firmly onto the magnet. Done!
How to remove the mounting plate
Remove the mounting plate
Hold the plate firmly against the wall and slowly pull the adhesive strips straight down along the wall — stretch them until they release, then gently remove the plate.
Screw Mounting Option – For Irregular or Textured Walls
Screw the mounting plate into the wall
Use the included screw — add a wall plug for extra hold if needed.